When to call
- No hot water, or hot water that runs out quickly
- Water pooling under or around the tank
- Rumbling, popping or banging from the tank
- Rusty or discolored hot water
- A pilot light that will not stay lit, or a tripped breaker
What to do right now
- 1
If the tank is leaking, close the cold water valve on the pipe above the heater.
- 2
Gas heater: turn the gas control to off or pilot. Electric heater: switch it off at the breaker.
- 3
If you smell gas, leave and call your gas utility or 911 from outside.
- 4
Do not touch the relief valve or its pipe if it is discharging hot water.
- 5
Note the brand, size and age from the label. The plumber will ask.
What the plumber will usually do
The plumber will check the power or gas supply, the thermostat, the heating elements or burner, and the valves. Many faults, such as a failed element, thermocouple or thermostat, can be repaired.
A tank that is leaking from its body cannot be repaired and has to be replaced. Tank heaters commonly last around 8 to 12 years, so on an older unit a plumber may recommend replacement over an expensive repair.
If you replace it, ask about the options: the same size tank, a larger one, or a tankless unit, and what each costs installed including permits and removal of the old heater.
Common questions
Should I repair or replace my water heater?
As a rule of thumb, repair makes sense on a younger unit with a single failed part. On a unit near the end of its life, or one with a leaking tank, replacement is usually the better use of money. The plumber can price both.
Can a water heater be replaced the same day?
Sometimes, if the plumber has a suitable unit available. Ask on the phone. We cannot guarantee timing.
Why is my water heater making noise?
Popping or rumbling is usually sediment that has settled in the bottom of the tank. Flushing can help, but heavy build-up shortens the life of the unit.